| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| CNC Machine Types http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=49454 |
Page 1 of 1 |
| Author: | Parser [ Wed Jun 07, 2017 2:47 pm ] |
| Post subject: | CNC Machine Types |
Hey guys, I haven't posted for awhile, but I am still using my K2 3925 machine and it's done a great job for me for about the last 10 years or so. I have a friend who is a very accomplished guitar builder who is interested in picking up a machine. I recommended a servo controlled machine that runs G-Code with a Z height of at least 8". He's Ok with using a router based machine. I think a working area of 2 ft x 3 ft is about right for guitar work. I know K2 has disappeared and I haven't shopped for these things for awhile. Can you guys recommend any manufacturers in particular? Thanks - Trevor |
|
| Author: | Don Williams [ Wed Jun 07, 2017 2:49 pm ] |
| Post subject: | Re: CNC Machine Types |
Seems like a lot of the small players have disappeared... A lot of folks seem to like their XZero's. |
|
| Author: | Don Williams [ Wed Jun 07, 2017 2:49 pm ] |
| Post subject: | Re: CNC Machine Types |
Oops...duplicate post. Sorry. |
|
| Author: | Allen McFarlen [ Wed Jun 07, 2017 3:45 pm ] |
| Post subject: | Re: CNC Machine Types |
I built my own, as there was nothing available in the size I wanted (700mm x 1000mm x 300mm of Z) that was built robust enough, and didn't need me to remortgage the house. Lot's of work, and at times I asked myself what the heck did I do that for, but now that it's built I'm glad I did. I know so much more about the machines, and how to fix it when something goes wrong. |
|
| Author: | BMac [ Wed Jun 07, 2017 3:47 pm ] |
| Post subject: | Re: CNC Machine Types |
I have a K2 3925 that I've been using for the last 10 years also. It has worked very well except for some Mach3 issues. I'm now running a kflop board with KMotioncnc instead of Mach3. Ron Liboon from K2 is now at Velox CNC. They have a 2536 machine, so that may warrant a look at their website. |
|
| Author: | Parser [ Wed Jun 07, 2017 4:14 pm ] |
| Post subject: | Re: CNC Machine Types |
Thanks for the info guys, I've been out of the market for a bit and greatly appreciate it! |
|
| Author: | Sprockett [ Sat Sep 02, 2017 11:21 pm ] |
| Post subject: | Re: CNC Machine Types |
BMac wrote: I have a K2 3925 that I've been using for the last 10 years also. It has worked very well except for some Mach3 issues. I'm now running a kflop board with KMotioncnc instead of Mach3. Ron Liboon from K2 is now at Velox CNC. They have a 2536 machine, so that may warrant a look at their website. I still have mine, the machine works a treat. I just upgraded it's computer and have started working on the control box, I want it to run the CNC, Dust Collection, and Dust Shoe lights all from Mach3/4. Too Cool.... -Paul- |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|