| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| dxf files for strat http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=49863 |
Page 1 of 1 |
| Author: | dberkowitz [ Thu Oct 26, 2017 9:48 am ] |
| Post subject: | dxf files for strat |
Anyone have or could suggest where I could get a dxf file for a strat rout. I don't need the body, but rather the routs for the neck pocket, pickups and control cavity, front and rear tremolo routs. Suggestions? |
|
| Author: | toddb [ Fri Oct 27, 2017 4:54 pm ] |
| Post subject: | Re: dxf files for strat |
I don't have a dxf but I do have a detailed pdf. I't is slightly larger than 500kb so I couldn't upload it, and It wouldn't compress enough to make a difference. If you're interested you can pm me with your email and I can send it to you. |
|
| Author: | Don Williams [ Fri Oct 27, 2017 7:59 pm ] |
| Post subject: | Re: dxf files for strat |
I got you covered David... |
|
| Author: | Gasawdust [ Tue Oct 31, 2017 4:10 pm ] |
| Post subject: | Re: dxf files for strat |
Several folks on the Vectric.com forum doing Strats. I think I remember dxf files being posted there. Check it out. Tom |
|
| Author: | Ken McKay [ Wed Nov 29, 2017 5:33 pm ] |
| Post subject: | Re: dxf files for strat |
There are strats and then there are strats. Know what you are getting Andy. Email me if you need further details. I don't intend to leave anyone out so I would be happy to discuss what I mean. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|