| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| NEW Fusion 360 Modeling Instructional Videos are out! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=53025 |
Page 1 of 1 |
| Author: | cyborgcnc [ Thu Mar 19, 2020 10:04 pm ] |
| Post subject: | NEW Fusion 360 Modeling Instructional Videos are out! |
All, Having looked at the modeling world out there, and wanting to make sure that first time "CNC Luthiers" get a head start, I have just competed a new series of instructional videos! Since Autodesk is offering a FREE ONE YEAR license to Fusion 360 to hobbyist, and small home/shops/users, now is a perfect time to learn modeling. I have created this video series, with over 6 1/2 hours of instructions, that will walk a beginner through the process of modeling an Archtop Acoustic guitar, from the Bob Benedetto plans. You can get all the information here: https://cncguitar.com/cnc-guitar/fusion ... op-guitar/ And please let me know if you have any questions. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|