| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Early Days of CNC http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=55713 |
Page 1 of 1 |
| Author: | ballbanjos [ Mon Jun 12, 2023 5:58 pm ] |
| Post subject: | Early Days of CNC |
Not a lutherie example, but I stumbled across this YouTube video that's a pretty interesting watch. The first computers I worked with way back when used the punched paper tape they're using here. Guess that dates me, eh? Dave https://www.youtube.com/watch?v=TnsKj1Hwf7o |
|
| Author: | Chris Pile [ Mon Jun 12, 2023 7:30 pm ] |
| Post subject: | Re: Early Days of CNC |
Count me in those days, too. I remember when bubble chips were considered a step up. Now they don't even make them. |
|
| Author: | SteveSmith [ Mon Jun 12, 2023 7:31 pm ] |
| Post subject: | Re: Early Days of CNC |
I started out with punch cards. Don’t miss em. Steve |
|
| Author: | Chris Pile [ Mon Jun 12, 2023 11:45 pm ] |
| Post subject: | Re: Early Days of CNC |
In the late 70's up into the early 2000's I was writing G-code every day. I was good. I could get some jobs done quicker than the CATIA jockeys could program the job. |
|
| Author: | Skarsaune [ Tue Jun 13, 2023 7:33 am ] |
| Post subject: | Re: Early Days of CNC |
Chris Pile wrote: In the late 70's up into the early 2000's I was writing G-code every day. I was good. I could get some jobs done quicker than the CATIA jockeys could program the job. I resemble that remark.  CATIA jockey, but tooling/fixturing design side. CATIA in Wichita had to be aircraft, right? |
|
| Author: | Chris Pile [ Tue Jun 13, 2023 10:43 am ] |
| Post subject: | Re: Early Days of CNC |
Quote: CATIA in Wichita had to be aircraft, right? Yup. But it's good for making anything, really. The gubmint funded the development of CATIA years ago for the military to build submarines, and the like. They just keep making it better and better. |
|
| Author: | Jim Watts [ Thu Jun 15, 2023 4:35 pm ] |
| Post subject: | Re: Early Days of CNC |
Chris Pile wrote: In the late 70's up into the early 2000's I was writing G-code every day. I was good. I could get some jobs done quicker than the CATIA jockeys could program the job. Another "CATIA Jockey" here, tooling and loft guy. But you coudn't MDI a 5 axis helicopter blade or leading edge  . I miss those days.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|