| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Vcarve pro 12.006 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=56739 |
Page 1 of 1 |
| Author: | bluescreek [ Sun Aug 25, 2024 9:22 am ] |
| Post subject: | Vcarve pro 12.006 |
just upgraded to this and looking for advice as of now , with all the changes I havn't found anything that made it worth the extra money anyone else up grade to this that can shed some light? Understanding that one is used to the old way I assume there will be a learning curve. they removed the undo button and while they did change the icon layout I have not seen anything yet that made it worth the upgrade cost. Can anyone enlighten me thanks |
|
| Author: | Jim Watts [ Sun Aug 25, 2024 5:25 pm ] |
| Post subject: | Re: Vcarve pro 12.006 |
The most benefit goes to the company pushing the upgrade:) |
|
| Author: | bcombs510 [ Fri Aug 30, 2024 2:35 am ] |
| Post subject: | Re: Vcarve pro 12.006 |
This may help - https://www.vectric.com/upgrade/vcarve/ There are some new drawing tools in aspire which could be useful. https://www.vectric.com/upgrade/aspire/ ... re%20items https://www.youtube.com/watch?v=2OIx3kVIVkE Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | ballbanjos [ Mon Sep 02, 2024 4:55 am ] |
| Post subject: | Re: Vcarve pro 12.006 |
I did the upgrade when it first came out, but mine was free since I had done a paid upgrade within the past year. All in all, it seems to run a little faster than the previous version, and the cut preview function is a definite improvement. Not a lot of difference in how you use it though. I'm glad I upgraded, but whether it's worth the upgrade cost I can't really say. Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|