Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/
Hutch's new cnc learning http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=56896	Page 1 of 1

---

Author:	banjopicks [ Sat Nov 23, 2024 6:20 am ]
Post subject:	Hutch's new cnc learning
I decided to make a new thread after realizing hiw far off topic i was getting on my tiling thread. Ill be asking all my questions here. Ill starr with a repeat question. Can you tell me what are the most useful bits for guitar work? I see these variety packs for $27. I don't have high confidence in those. Ive bwen thinking about electric necks which are too long for my 6050. I was wondering about cutting those diagonally. Would that be a problem? Sent from my SM-A546V using Tapatalk

---

Author:	bcombs510 [ Sat Nov 23, 2024 11:59 pm ]
Post subject:	Hutch's new cnc learning
I would check out PreciseBits as they have a section dedicated to luthiery - https://www.precisebits.com/application ... rtools.htm I use the bits from them for most things but I also use these for fret slots which have worked well - https://www.ebay.com/itm/384573895741?m ... media=COPY I think you’re still trying to decide on a machine to buy. Something to keep in mind - cheaper machines with poor quality spindles, collets, etc… means more runout in the system. Tiny bits and runout don’t mix. Sent from my iPhone using Tapatalk Pro

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/