WAY COOL !!! wish I had one of those
.Lars
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Keith MacKenzie's Automatic Kerf Lining Machine http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=23544 |
Page 1 of 1 |
| Author: | Chris Paulick [ Sun Aug 23, 2009 1:36 pm ] |
| Post subject: | Keith MacKenzie's Automatic Kerf Lining Machine |
Here You Go! |
|
| Author: | Lars Stahl [ Sun Aug 23, 2009 2:34 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
WAY COOL !!! wish I had one of those .Lars |
|
| Author: | Chris Paulick [ Sun Aug 23, 2009 2:50 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
I believe Keith is taking orders for them. If you like I can check for sure or maybe he will check in here. |
|
| Author: | Tom West [ Sun Aug 23, 2009 3:14 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Chris: Very ingenious,Keith seems to be very talented. By chance would he have been a machinist? |
|
| Author: | Chris Paulick [ Sun Aug 23, 2009 3:17 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Engineer. |
|
| Author: | LanceK [ Sun Aug 23, 2009 3:39 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
I would be very interested in one of these as well as Keith's sweet pin router jig. |
|
| Author: | John Killin [ Sun Aug 23, 2009 3:48 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
That is way cool. It boggles my mind every time I see it. Good video Chris, and Great machine Keith. John |
|
| Author: | Chris Paulick [ Sun Aug 23, 2009 3:52 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
He's not building the pantograph/ duplicator but I will be making a my version of it with some small changes to it in the pretty near future. As for the info on the design of the sled it's out there on Frets and somewhere here in a past discussion and Keith has just added a motor and made some smaller design changes. You might have to discuss prints or plans with him. Lance you can remove this from the tut section if you think it's in the incorrect place. I wasn't sure if it was or not. So feel free to move it if you like. I guess it's more of a demo then tut. |
|
| Author: | Alain Moisan [ Sun Aug 23, 2009 4:06 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
I still prefer my tablesaw sled for making kerfed linings, but man this gizmo is super cool! |
|
| Author: | David Newton [ Sun Aug 23, 2009 4:08 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Actually, you don't want one of these machines, you want your local luthier buddy to want one. |
|
| Author: | Chris Paulick [ Sun Aug 23, 2009 4:31 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
It's a great conversational piece to say the least when people see your shop! 
|
|
| Author: | Brock Poling [ Sun Aug 23, 2009 7:01 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Holy Smokes is that COOL! |
|
| Author: | Chris Paulick [ Sun Aug 23, 2009 9:09 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
If anyone is interested Keith told me he has 4 cutters made. He has no prints available at this time. If anyone is interested in a cutter PM me. |
|
| Author: | bluescreek [ Mon Aug 24, 2009 7:14 am ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Put me into the mix. Can you email me at tippie@epix.net thanks |
|
| Author: | Kim [ Mon Aug 24, 2009 8:43 am ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
Wow, a Frank Ford Ksled with a gear motor fitted, how clever. |
|
| Author: | Chris Paulick [ Mon Aug 24, 2009 9:12 am ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
How about the drop in ceiling edge channel for the out feed guide? There are some modifications to the design that Keith has made from Kim's and Frank Ford's design which he based his design off of that make it a nice machine. |
|
| Author: | Bruce Dickey [ Mon Aug 24, 2009 2:55 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
The Kerfin' Keith McKenzie Slotter, that is totally awesome. |
|
| Author: | Stephen Boone [ Mon Aug 24, 2009 9:49 pm ] |
| Post subject: | Re: Keith MacKenzie's Automatic Kerf Lining Machine |
We need to get him working on an automatic French polish machine!!!!!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|