| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Building a Vacuum Press http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=26447 |
Page 1 of 1 |
| Author: | Mike OMelia [ Wed Mar 10, 2010 8:36 am ] |
| Post subject: | Building a Vacuum Press |
I saw this in the main forum (credit to Nelson Guitars) and thought it should not be lost as the question comes up a lot. Also, Harbor Freight carries inexpensive vacuum pumps. I hope to build one of these soon, and if any of you use the ideas below, please comment on your projects (tips, tricks, etc) http://www.joewoodworker.com/veneering/welcome.htm Mike |
|
| Author: | unkabob [ Sun Mar 28, 2010 1:03 pm ] |
| Post subject: | Re: Building a Vacuum Press |
Mike: There is a lot of information there. Do you have any problem of braces moving around as you draw the vacuum? Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|