| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Cam Clamp Making Video http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=28494 |
Page 1 of 1 |
| Author: | segovia [ Wed Aug 04, 2010 5:28 am ] |
| Post subject: | Cam Clamp Making Video |
http://www.youtube.com/user/stevemaskery |
|
| Author: | devincox [ Wed Aug 04, 2010 9:11 am ] |
| Post subject: | Re: Cam Clamp Making Video |
excellent video. thanks for posting it. Devin |
|
| Author: | segovia [ Wed Aug 04, 2010 10:26 am ] |
| Post subject: | Re: Cam Clamp Making Video |
devincox wrote: excellent video. thanks for posting it. Devin I have ordered his band saw DVD's - if they are any good I'll post a recommendation on the forum Regards John |
|
| Author: | devincox [ Wed Aug 04, 2010 11:04 am ] |
| Post subject: | Re: Cam Clamp Making Video |
I was looking at those as well. I will wait for your review. Thanks, Devin |
|
| Author: | segovia [ Wed Aug 04, 2010 1:38 pm ] |
| Post subject: | Re: Cam Clamp Making Video |
devincox wrote: I was looking at those as well. I will wait for your review. Thanks, Devin Should have them tomorrow and I will have looked the them by the time the weekend is over. John |
|
| Author: | segovia [ Sun Aug 08, 2010 4:44 pm ] |
| Post subject: | Re: Cam Clamp Making Video |
devincox wrote: I was looking at those as well. I will wait for your review. Thanks, Devin Hi Devin Yes, very good video - well worth the price. The only problem being that it makes you want out purchase the whole set. Well presented, gets straight to the point and are delivered professionally and clearly. Regards John |
|
| Author: | devincox [ Mon Aug 09, 2010 12:36 pm ] |
| Post subject: | Re: Cam Clamp Making Video |
Excellent. I will have to make these make of my next purchases. I found a website that has some of his jigs listed. http://homepage.ntlworld.com/steve.maskery/ Devin |
|
| Author: | devincox [ Mon Nov 15, 2010 10:37 am ] |
| Post subject: | Re: Cam Clamp Making Video |
Based on John's positive review, I purchased the complete bandsaw dvd set (4,5,6) and wow, that was money well spent. I made the dovetail jig this weekend and it works famously! I'm building an english workbench so the tenon cutting jig is next on my list. Thanks for the initial link and the review John. Regards, Devin |
|
| Author: | segovia [ Mon Nov 15, 2010 4:39 pm ] |
| Post subject: | Re: Cam Clamp Making Video |
Hi Devin Glad you liked it, Steve has a good style - not to quick and not to slow All his stuff is well produced John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|