| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Cheap Reamer Option for Opening Up Replacement Tuner Buttons http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=29437 |
Page 1 of 1 |
| Author: | Chris Paulick [ Mon Oct 11, 2010 10:39 am ] |
| Post subject: | Re: Cheap Reamer Option for Opening Up Replacement Tuner Buttons |
Todd, I think I used a #29 drill bit, same bit for a #8-32 tap. I hadn't thought of converting it into a reamer though. I guess that's one to add to the list when the tip wears out from metal drilling. I use med. CA figuring it might fill the gap on the flat of the shaft a little better and that was what Laurent Brondel used and he turned me onto the process. The vise jig was my idea though. |
|
| Author: | Chris Paulick [ Tue Oct 12, 2010 8:22 am ] |
| Post subject: | Re: Cheap Reamer Option for Opening Up Replacement Tuner Buttons |
OK, now I see how it's a definate advantage for a blind hole. Thanks for the explaination. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|