This is what folks can do that can't afford a cnc and tooling and software.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Making Custom Pickup Toppers http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=33436 |
Page 1 of 1 |
| Author: | Chris Paulick [ Mon Sep 05, 2011 6:29 am ] |
| Post subject: | Making Custom Pickup Toppers |
Another use for Keith MacKenzie's Pantograph/ Duplicator You can also use a pup cover as a template and thickness sand them to size with a spindle sander with a fence. |
|
| Author: | cyborgcnc [ Thu Nov 17, 2011 10:05 pm ] |
| Post subject: | Re: Making Custom Pickup Toppers |
That is really nice! So this is what folks did before cnc machines huh? |
|
| Author: | Chris Paulick [ Fri Nov 18, 2011 5:57 am ] |
| Post subject: | Re: Making Custom Pickup Toppers |
This is what folks can do that can't afford a cnc and tooling and software.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|