| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Cheap Vibratory Unit for cleaning Metal Parts Etc. http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=33813 |
Page 1 of 1 |
| Author: | WudWerkr [ Sat Oct 08, 2011 10:02 am ] |
| Post subject: | Cheap Vibratory Unit for cleaning Metal Parts Etc. |
I built this from a coffee can as you can see , I made it from stuff I had Lying around . The vibratory motor was out of a old sand blast cabinet . This particular motor is kinda expensive , however I think a cheaper unit could be had . Anyway , I mount it in two holes I have drilled in a table and just set it in on the vibe pegs and let it sit , if its clamped it stops vibration and you dont want that . Put media in and some cleaner and turn it on . In the bottom of the can you can see I forced a lid down in there . I put silicone in the bottom and forced lid down over it to help control leaks from cleaner . The media only needs to be wet , you dont want liquid standing . Attachment: 100_1240.jpg Attachment: 100_1242.jpg Attachment: 100_1243.jpg Attachment: 100_1244.jpg Attachment: 100_1246.jpg
|
|
| Author: | Jim_H [ Sat Oct 08, 2011 11:53 am ] |
| Post subject: | Re: Cheap Vibratory Unit for cleaning Metal Parts Etc. |
Awesome!, Thanks Wud! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|