| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| arctop bridge fitting ?? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=41914 |
Page 1 of 1 |
| Author: | pikolo [ Tue Nov 12, 2013 12:21 pm ] |
| Post subject: | arctop bridge fitting ?? |
Hello!I am building greek instruments like bouzouki...their bridge is not glued but movable...it is an archtop instrument so i would like to know if there is a simple -fase way or a jig to make the bridge fit absolutly to the top with no gaps...?here is a sample of the instruments 
|
|
| Author: | Colin North [ Wed Nov 13, 2013 4:51 pm ] |
| Post subject: | Re: arctop bridge fitting ?? |
I find it hard to believe that a bridge with wings that long and thin is just loose, Would it not just buzz when played? Anyway, perhaps this may be of some use http://www.mandolinluthier.com/Bridge_fitting.htm |
|
| Author: | pikolo [ Fri Nov 15, 2013 5:40 am ] |
| Post subject: | Re: arctop bridge fitting ?? |
no it doesnt buzz at al...Collin i am doing it this way right now but it is very hard at time effort to make it correct i was hoping for a jig maybe like the one stewmac sells if it possible to use it for this type of job i am willing to pay for it...but the mandoline bridge do have holes on it but the bouzouki one doesnt...
|
|
| Author: | pikolo [ Tue Nov 19, 2013 1:12 pm ] |
| Post subject: | Re: arctop bridge fitting ?? |
Anyone? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|