Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Troji attachment for a workmate. Cheap and works great.
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=43197		 Page 1 of 1
Author:  Linus [ Sat Apr 12, 2014 2:48 pm ]
Post subject:  Troji attachment for a workmate. Cheap and works great.
This idea has been floating around before. It's not my original idea, just my take on it.


I made this troji attachment for a $30 black & decker workmate. It works great and is super cheap.
I already had the workmate, scraps of wood, and foam so the total cost was around $6 for the bolts to attach it to the workmate.

I notched one side so a guitar with neck attached could be put in neck down if I needed to drill a pickup jack.

They are easy to put on and take off so they can be stowed away when not in use and the workmate can be used for other things.

Not much else to say so I'll let the pictures do the talking.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

It works great, holding the guitar securely.

Oh!! And I used hot hide glue, so you know it sounds awesome. Sustain for days. :lol:
Author:  cphanna [ Sat Apr 12, 2014 6:17 pm ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
Nice thinking there. Looks perfectly functional to me.
Author:  Doug Balzer [ Sat Apr 12, 2014 7:16 pm ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
May not be pretty but I use mine all the time. Bought the workmate used for $15 and the rest was from scrap.
Author:  Alex Kleon [ Sun Apr 13, 2014 12:59 pm ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
Nice looking set-up, Doug. If you put a piece of ply across the bottom stretchers with a bag of sand on top, it might be a bit more stable.
Nice pile of BRZ bricks in the first pic, as well! :D

Alex
Author:  Linus [ Sun Apr 13, 2014 10:10 pm ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
Yep. Those BRZ bricks have great tap tone.
Author:  klooker [ Mon Apr 14, 2014 9:49 am ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
That's a great idea! Definitely going to make one.

Thanks
Kevin Looker
Author:  ChuckH [ Mon Apr 28, 2014 10:21 pm ]
Post subject:  Re: Troji attachment for a workmate. Cheap and works great.
Nice, I have the workbench in my Amazon cart ready to buy.


Sent from my walkie talkie using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/