| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Radial Rosettes http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=46321 |
Page 1 of 1 |
| Author: | ericschaeferguitars [ Tue Sep 08, 2015 3:17 pm ] |
| Post subject: | Radial Rosettes |
Okay, some of you have asked about radial rosettes and the jig I use for designing and creating patterns, so I hope the 3 articles below help. Enjoy! Let me know what you think! Radial Rosettes: Building the Radial Rosette Maker http://www.ericschaeferguitars.com/radi ... es-buildin…/ Radial Rosettes: Making a Basic Pattern http://www.ericschaeferguitars.com/radi ... es-making-…/ Installing the Rosette http://www.ericschaeferguitars.com/inst ... e-rosette/ |
|
| Author: | dzsmith [ Tue Sep 08, 2015 8:42 pm ] |
| Post subject: | Re: Radial Rosettes |
Very clever, Eric! Thanks very much for sharing! Dan |
|
| Author: | MikeWaz [ Wed Sep 09, 2015 6:53 pm ] |
| Post subject: | Re: Radial Rosettes |
This is great Eric. Looking forward to trying it on an upcoming project. Mike |
|
| Author: | ericschaeferguitars [ Fri Sep 11, 2015 1:29 pm ] |
| Post subject: | Re: Radial Rosettes |
Thanks Mike. Post a picture if you try it on your upcoming project. I'd love to see it. |
|
| Author: | Bryan Bear [ Tue Sep 15, 2015 3:25 pm ] |
| Post subject: | Re: Radial Rosettes |
Thanks for posting these! Sadly I can't access the articles; it says they site is unavailable. I suppose it could be block here at work. I'll try again later from another network. |
|
| Author: | ericschaeferguitars [ Wed Sep 16, 2015 1:22 pm ] |
| Post subject: | Re: Radial Rosettes |
The site was down for maintenance but its back up now, Brian. Check it out and let me know what you think! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|