What? You don't like using a rasp and files?
Looks like a real labour saver, Dan. Well done! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
Alex
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Solid body bevel jig http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10117&t=47312 |
Page 1 of 1 |
| Author: | dzsmith [ Sat Feb 20, 2016 5:15 pm ] |
| Post subject: | Solid body bevel jig |
This jig worked great! Dan |
|
| Author: | Alex Kleon [ Sun Feb 21, 2016 12:05 am ] |
| Post subject: | Re: Solid body bevel jig |
What? You don't like using a rasp and files? Looks like a real labour saver, Dan. Well done! Alex |
|
| Author: | Ken McKay [ Sun Feb 21, 2016 1:56 pm ] |
| Post subject: | Re: Solid body bevel jig |
Smart! |
|
| Author: | Joe Beaver [ Wed Sep 21, 2016 7:23 pm ] |
| Post subject: | Re: Solid body bevel jig |
Ok, so I'm a dummy.... So you have a base on the jig that gives you the angle? Then you control the depth of the cut by eye? And move the body around on the jig to give you access to different areas? I think I can use that. Thanks Dan !!! |
|
| Author: | Chris Pile [ Wed Sep 21, 2016 11:54 pm ] |
| Post subject: | Re: Solid body bevel jig |
Quote: What? You don't like using a rasp and files? Looks like a real labour saver, Dan.In my case, using a rasp and files saved me the labor of building the jig.... |
|
| Author: | SG Lou [ Sun Nov 27, 2016 3:08 pm ] |
| Post subject: | Re: Solid body bevel jig |
Looks great but I like using my old Dragon Tail rasp, goes through Mahogany like a hot knife through butter. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|