Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Bridge Finishing?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10122&t=19433		 Page 1 of 1
Author:  Steve Sollod [ Fri Oct 31, 2008 9:24 am ]
Post subject:  Bridge Finishing?
Does anyone have any suggestions for finishing bridges? For my previous 3 builds, I didn't do anything to finish the bridge other than sanding. I have a rosewood bridge that I intend to use on my latest build that is somewhat light in color and with pronounced grain. I like the grain, but it is kinda light. I wiped some naptha on it and it looked great. But of course when it dries, it looks like it did. Is stain the answer? I'm not sure what color... How can I make it look like it does with the naptha on it... darken it up?
Author:  LanceK [ Fri Oct 31, 2008 9:34 am ]
Post subject:  Re: Bridge Finishing?
Hi Steve,
The simplest way I know if is to take to to the buffing wheel! That will make it shine like its finished.
That said, I prefer a matte look to my bridges so I got thought the gamut of sanding papers 150, 220, 400, 600 and then 0000 steel wool and that does a pretty good job.

Hope this helps!
Author:  Steve Sollod [ Fri Oct 31, 2008 9:37 am ]
Post subject:  Re: Bridge Finishing?
But, what about darkening it?
Author:  Michael Dale Payne [ Fri Oct 31, 2008 9:53 am ]
Post subject:  Re: Bridge Finishing?
Take some 100% pure boiled lindseed oil and coat the un polished bridge and allow it to dry out for three days. Do it again and allow a week to dry out, then take it to the buffer. This will give a deep wetted apearance sheen (wetted darker not staind darker)
Author:  GeraldSheppard [ Fri Oct 31, 2008 9:58 am ]
Post subject:  Re: Bridge Finishing?
Hi Steve,

Have you tried the lemon oil treatment? That may do it.

Try out any other ideas on a spare piece of wood before doing it to a bridge on your guitar. If the guitar is yours and you plan to keep it you might try shellac.

I make my own blond shellac - I can't remember the formula but it is very thin, not like the store bought stuff. In the past I have rubbed a coat of shellac onto wood to improve it's appearance - usually on toys. Again try it on a spare piece of wood. I prefer to make my shellac, but if you only want to try it once or twice, you may be able make the "store bought" shellac work - just mix it down with lots of denatured alcohol. Experiment until it does the job you want.

I would not do this on a guitar I made to sell because the buyer may use lemon oil on the bridge which may react with the shellac.
Author:  Hesh [ Fri Oct 31, 2008 10:00 am ]
Post subject:  Re: Bridge Finishing?
Mike Doolin was using Tung Oil at some point, perhaps he still is, to darken dark wood bridges.

I like micro-mesh pads which is just another way to buff out the bridge as Lance mentioned. If you take 20 minutes to go through all of the various pads, in the correct order...... :D , it really shines things up and the shine lasts as well. The micro-mesh pads are also awesome for chucking your wood, bone, or fossilized Mastiff poop bridge pins in a cordless drill and again going through all of the grits.

Here are some pics of the results that micro-mesh pads provide:

Attachment:
DSC01230.jpg


Attachment:
DSCN1874r.jpg
Author:  BruceHerrmann [ Wed Nov 05, 2008 3:39 pm ]
Post subject:  Re: Bridge Finishing?
I really like the look of a well polished bridge and I agree, the micro-mesh pads are amazing.
Sometimes I'll finish it off on the buffing wheel but often it's fine after the last pad.
I've also used the micro-mesh sandpapers, go on up to 12000 if you want, it will produce
a fantastic finish. If you have a large wheel buffer, there are various color polishing
sticks that can produce a darker look if you desire.....

Best
Bruce
Author:  Brock Poling [ Thu Nov 06, 2008 12:56 pm ]
Post subject:  Re: Bridge Finishing?
The micromesh can give you a shine good enough to produce a reflection in cocobolo, ebony and some of the rosewoods. But the problem I have with doing this is it wears pretty fast and you get spots that are shiny and spots that are dull. To my eye, that looks pretty bad.

But they look great when they are first applied.
Author:  GeraldSheppard [ Tue Dec 09, 2008 8:12 pm ]
Post subject:  Re: Bridge Finishing?
I agree with you Brock. I prefer a satin sheen from 600 or 800 grit paper.
Author:  MRS [ Thu May 14, 2009 1:57 am ]
Post subject:  Re: 香港六合彩曾道人玄机白小姐图库
uuyy58826 wrote:
本报讯(记者 桑琴)5月12日是汶川大地震一周年纪念日。昨日，记者从湖南卫视获悉，为了纪念在灾难中的死难者，鼓舞更多的人树立重建的希望和信心，湖南卫视“快乐女声”决定全天停止各大唱区的准备工作，为经历过“5·12汶川大地震”的人们送去希望、祝福和信心。

　　已经于前日结束报名的“快乐女声”长沙赛区，5月10日正式开唱的南京唱区，正在紧张筹备的成都唱区，以及其他各个合作城市，都在5月12日暂停了各项准备工作，也暂时不接受选手报名。

　　在暂停的同时，节目组通过各自的方式向灾区的群众表达自己的祝福。正在成都紧张准备分唱区发布会的导演表示：“虽然今天暂停了‘快女’的报名和准备工作，但节目组的工作人员并没有休息，而是在用我们所有人的行动为灾区加油鼓劲，我们正在组织一个‘微笑四川’的活动，通过报纸和网络征集一千张笑脸，让微笑扫除地震带来的心理阴影，带给灾区的人们以希望、信心、力量。这些笑脸将在成都分唱区发布会上全部展现。”
香港六合彩
香港六合彩
香港六合彩
香港六合彩
香港六合彩

Yes i agree 100%.
Author:  Tom West [ Sat Jun 13, 2009 8:38 am ]
Post subject:  Re: Bridge Finishing?
Steve: Have tried polymerized tung oil on a few. As others have said try it on scrap first and just use one or two coats. I prefer them unfinished and if there is a bit of lighy grain showing, I think it adds a bit of a different look from the traditional all black ebony. Also am not always in favor of ebony bridges ,but that's another story. Good luck.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/