| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Bolt on neck question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10122&t=23103 |
Page 1 of 1 |
| Author: | Steve Davis [ Thu Jul 16, 2009 12:20 pm ] |
| Post subject: | Bolt on neck question |
I am wondering if these are glued aswell...is the fretboard glued to the top plate? I am talking about the simplest form of this not an adjustable one |
|
| Author: | Christian Schmid [ Thu Jul 16, 2009 12:29 pm ] |
| Post subject: | Re: Bolt on neck question |
Hi Steve, you can build a bolt on neck similar to the Taylor NT neck which bolts the fingerboard extension as well. http://www.taylorguitars.com/guitars/features/ntneck/Overview.aspx Many builders use a neck like that. (One of the John Mayes DVD's discusses the construction of such a neck). On my just finished guitar, I used a "regular": 2-bolt neck. I don't have the fingerboard glued on yet (I'll do that once I'm absolutely sure I don't have to take of the neck anymore for a while). I don't notice any negative effects of not having it glued on right now, however I think it's common practice to glue it on. Christian |
|
| Author: | Steve Saville [ Fri Jul 17, 2009 12:56 am ] |
| Post subject: | Re: Bolt on neck question |
I bolt the fretboard extension on also. I'm so glad that I do. I started doing this after I had to remove my first neck. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|