Official Luthiers Forum!

Hi. Newbie here.

I have assembled and modified several guitars over the years. I'm constantly swapping pots, caps changing wiring configurations. I've finished several guitars, too. I have a plethora of parts such as bridges and tuners and pickups. I have everything i need to build a guitar including some HIGHLY flamed redwood. What I don't have are the skills necessary to build a guitar from scratch.

I have a set of Adeson Brian May Spec Burns Tri-Sonics pickups.

What I'd love to have is a set neck, semi-hollow body guitar. The pickups screw directly to the body. There needs to be a wiring rout for each of the three pickups. Do any of you guys have the skills to put together a custom body and neck and would you be willing to do the job and how much would it cost?

Here's a pick of the redwood I have. I'm not locked into using the redwood for the guitar. However, if you think you'd like to do a partial trade for the redwood and some cash, let's talk.





I also have a loaded Eric Johnson Strat pickguard to use as partial trade if you want to go that way.

Torren, your question really isn't about a "kit" as most of us think of it - I would suggetst you ask at the Electric Guitar and Bass subforum. There is a lot more activity there and you are more likely to find someone who will do this for you.