| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Manual Neck Carving Machines http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10122&t=54591 |
Page 1 of 1 |
| Author: | Pegasusguitars [ Sat Dec 04, 2021 3:21 pm ] |
| Post subject: | Manual Neck Carving Machines |
A couple of years ago I posted this same question about neck carving macshines and am giving it another go. I fully understand manual carvers can not be compared with CNC, and that CNC is the technology of our time, but don't see myself moving into the CNC world at this point. I have little computer support here and no CNC programming experience.and I'm kinda old to go down that path. If I was younger, then yes. I see somesone selling a manual carving duplicator made by Carvermaster on Craigslist. They don't do instruments, so I can't get real info from them on how it might work for necks. Carvermaster says it will do a great job of carving guitar necks, and that they have sold many of their machines to luthiers, but they can't give me any references to talk to. Anyone used or seen one used? Have a great Holiday Season, Thanks, Bob |
|
| Author: | Freeman [ Mon Dec 06, 2021 12:17 pm ] |
| Post subject: | Re: Manual Neck Carving Machines |
Can't help with the carving machine but I'm not sure I would put your question in the kit guitar subforum. And you might want to reach out to the archtop builders who sometimes use dupli-carvers to lessen the labor of making tops and backs. Benedetto shows a home made one in his book, I think Siminoff used to use one. |
|
| Author: | Glen H [ Mon Dec 06, 2021 5:21 pm ] |
| Post subject: | Re: Manual Neck Carving Machines |
Hi Bob I have no info on the Carvemaster but was curious if you have seen this http://www.doolinguitars.com/articles/neckdupe/ I built one for guitar necks and it works fine but I quit using it. I like things a little slower. |
|
| Author: | bluescreek [ Wed Jun 22, 2022 6:50 am ] |
| Post subject: | Re: Manual Neck Carving Machines |
there were a few carving machines I saw that worked none were perfect Alred made one that was on slides that worked X and Y used a stylus in the shape of the bit he used a 1/2 box bit, the verticle was in you hand on a lever . Cave decent results Hanali Moon hand another design , used a slide table on a drill press with a rotary cutter that look like a large nutmeg grinder and worked well each rig has their strengths and weaknesses |
|
| Author: | Skarsaune [ Wed Jun 22, 2022 11:36 am ] |
| Post subject: | Re: Manual Neck Carving Machines |
I got a Duplicarver setup from my brother in law with their gunstock attachment, which allowed for longer workpieces, IE guitar necks. It's a big awkward pantograph type setup, with counter weights, long arms, etc. Like John said, used a stylus similar to the bit shape to pick up on a master and drive a router. About the same timeframe, I got a Piranha XL (12x24) CNC router that fits on a small benchtop. I've spent 30 years in and around CNC machining. I pushed the duplicarver into a corner. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|