| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| First Build - clear coat http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10122&t=56230 |
Page 1 of 1 |
| Author: | JDubs [ Thu Jan 18, 2024 4:20 pm ] |
| Post subject: | First Build - clear coat |
Hello - I'm new here and a newer guitar player...still learning! I decided to try a guitar kit (Telecaster style) Christmas gift to myself. After much searching and you tube watching I decided to use minwax stain, followed by Tru Oil. I assume my next step(s) would be to add some kind of clear coat after about 10-12 coats of Tru Oil. I'm on coat #3 of the oil. Question: what recommendations might you all have with regard to the clear coat? Poly...lacquer....? Spray or brush on? Thoughts? Thanks! |
|
| Author: | SteveSmith [ Thu Jan 18, 2024 6:20 pm ] |
| Post subject: | Re: First Build - clear coat |
No clear coat needed over TruOil. Steve |
|
| Author: | Chris Pile [ Thu Jan 18, 2024 6:30 pm ] |
| Post subject: | Re: First Build - clear coat |
10 to 12 coats of TruOil should be plenty. |
|
| Author: | Pmaj7 [ Thu Jan 18, 2024 9:50 pm ] |
| Post subject: | Re: First Build - clear coat |
TruOil is the clear Sent from my SM-N960U1 using Tapatalk |
|
| Author: | JDubs [ Fri Jan 19, 2024 9:40 am ] |
| Post subject: | Re: First Build - clear coat |
Thank you all for the responses! Perfect! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|