| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Progress on #2 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=19912 |
Page 1 of 1 |
| Author: | JRE Productions [ Fri Dec 05, 2008 12:03 pm ] |
| Post subject: | Progress on #2 |
Ok, I had posted some pics in the General Guitar building area...but I think many of you Electric guitar nuts would appreaciate this one too. So here is my second attempt at a build. I am in the process of setting the neck on this one. Its just sitting in the dovetail joint. I also need to binding the body before glueing the neck on. 
|
|
| Author: | JRE Productions [ Fri Dec 05, 2008 12:04 pm ] |
| Post subject: | Re: Progress on #2 |
|
|
| Author: | SteveCourtright [ Fri Dec 05, 2008 12:11 pm ] |
| Post subject: | Re: Progress on #2 |
Looking good, Joe. Too much coffee before that second shot? What are you using for Pick ups? |
|
| Author: | JRE Productions [ Fri Dec 05, 2008 2:15 pm ] |
| Post subject: | Re: Progress on #2 |
Actually...no caffene before I took the pic. Caffene usually steadys my hand. Sorry for the bad Cell phone pics. My teenage daughters have my good camera. Pups? I don't really know. I was kind of waiting to see how this one turned out. If its a piece of crap when finished, it will get some matching pickups and be sold to cover the material. If it turns out halfway decent, I will probably load it with some PAF' type pups. Maybe SethLovers or Antiquities or simular. I actually have a set of 63/64 PAT number pups that are basically short magnet PAF's. But the covers are long gone. I suppose I could just by new chrome covers for them. It would sound very simular to the ES175. Still would like to try that 59/60 model..... Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|