Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Dec 11, 2024 6:59 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: strat question
PostPosted: Thu Feb 05, 2009 4:44 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 01, 2008 6:57 pm
Posts: 42
I'm in the process of buying a new guitar (only 305 to go!) and its a black 2007 strat with a roaswood fretboard. I bought it because it was on sale for 850 during boxing day but I was really looking for a maple neck strat instead. I've heard that some people have put lemon oil on the fretboard to give it that maple neck feel, does this work and what else would work without damaging the wood.

Would it b e bad to put 11's on it in standard?

_________________
" Blues is a low down achin chill, if you ain't never had it, I hope you never will."

Robert Johnson


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Thu Feb 05, 2009 5:27 pm 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
dylanger wrote:
I'm in the process of buying a new guitar (only 305 to go!) and its a black 2007 strat with a roaswood fretboard. I bought it because it was on sale for 850 during boxing day but I was really looking for a maple neck strat instead. I've heard that some people have put lemon oil on the fretboard to give it that maple neck feel, does this work and what else would work without damaging the wood.

Would it b e bad to put 11's on it in standard?


The lemon oil will not damage the wood but it will transfer to your hand and fingers and thereby to your strings. leaving dust and dirt and grim build up in the valley between winding pitches. This will kill the tone of the strings in very short order.

A fretboard should need only a regular wipe down with a lightly damp lint free cloth after each playing session. Oh and use distiled water for this and not much at all. Wash your hands before you play will also help keep your fretborad clean and fast.

If you want a rosewood neck to be fast first improve your technique to the point wire no added tension is applied to fret other than what is needed to break the string over the fret.

Now as far as slick feel to the fretboard you can have a luthier burnish the rosewood and for a long while it will be slicker than snot. But it is a rosewood and not maple fretboard. The difference you feel is because rosewood (most likely Indian rosewood) is a fairly open pore wood maple on the other hand is a very closed pore wood. They will never feel the same.


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Fri Feb 06, 2009 9:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Dec 01, 2005 11:38 am
Posts: 639
Location: United States
Look at my "Ebonade" thread. The impact is even greater on rosewood. Did you ask this over on MLP?mike


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Sat Feb 07, 2009 8:18 am 
Offline
Mahogany
Mahogany

Joined: Mon Dec 01, 2008 6:57 pm
Posts: 42
MLP being?

_________________
" Blues is a low down achin chill, if you ain't never had it, I hope you never will."

Robert Johnson


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Sun Feb 08, 2009 1:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Dec 01, 2005 11:38 am
Posts: 639
Location: United States
MLP = My Les Paul. A member there wanted to get more density in a rosewood FB-on a Strat. MLP is equal opportunity guitar tips site. I wish I could portray just what my messing around with CA accomplished. I am going after everything in the place except my Orville, and right now, that is a bunch of in the works guitars. The rosewood is very labor intense-side benefit is the collateral fret job.mt


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Sun Feb 08, 2009 8:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Dan Erlewine talks about his process with pure linseed oil (not boiled linseed oil) on pages 12-13 of How to Make Your Electric Guitar Play Great. He talks about lemon oil a bit too, saying that it's good for softening buildup and cleaning your fretboard, but not for protecting the wood.


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Tue Feb 10, 2009 6:16 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Thu Oct 11, 2007 6:48 am
Posts: 87
Location: United States
First name: Steve
Last Name: Cyr
City: Roseville
State: CA
Country: USA
Focus: Build
Status: Professional
I saw a discussion on lemon oil on another forum last year - the stuff called lemon oil is apparently mineral oil with some lemon scent added, and it has no wood conditioning properties - it can actually cause the wood to dry out. I've been using the StewMac fretboard oil on my rosewood fingerboards for about 6 years with good results.

--Steve

_________________
---Steve


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Thu Oct 01, 2009 2:53 pm 
Offline
Walnut
Walnut

Joined: Tue Sep 29, 2009 5:04 pm
Posts: 34
First name: Scot
State: CA
Zip/Postal Code: 91776
Country: USA
Focus: Build
Status: Amateur
You can put 11 on her no problem. The question is can your fingers handle 11's? If so then no worries. You will need a whole new set up switching to 11's. Adjustment of the trussrod, and intonation at the bare minimum. If it's new anyway you might as well do the whole set up and get the action where you want it. Which means lowering it to some degree on a brand new strat. If you have never done a set up before you can check out the Fender site. It walks you through the entire process. It is easier to do then most guitarists think. That is why alot of them just pay $50-$100 or more for someone else to do it for them. Here is the link to the Fender site with the instructions for a strat set up
http://www.fender.com/support/stratocaster.php

If you have done set ups before then you already know all this [:Y:]

I've had 9's,10's, and 11's on my strats. In the end I always end up back at the 10's to keep my fingers from getting tore up.


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Fri Oct 02, 2009 2:30 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 20, 2009 9:43 pm
Posts: 774
Location: Philadelphia, USA
First name: Michael
Last Name: Shaw
City: Philadelphia
Country: USA
Focus: Build
Status: Semi-pro
Elevens will be fine. Make sure to adjust the truss rod properly. This is something you need to do when switching gauges.


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Tue Oct 27, 2009 5:32 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Oct 21, 2006 7:07 am
Posts: 280
Location: United States
You can get aluminum tape and neatly cut out pieces to fit in between the frets. This will give you a very fast fingerboard, but not a very pretty fingerboard. duh

Are you sure you don't want to hold out for the maple neck?

_________________
It's not the miles ahead, it's the stone in your shoe


In Markham,Virginia


Top
 Profile  
 
 Post subject: Re: strat question
PostPosted: Wed Oct 28, 2009 12:21 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Jon L. Nixon wrote:
You can get aluminum tape and neatly cut out pieces to fit in between the frets. This will give you a very fast fingerboard, but not a very pretty fingerboard. duh

Are you sure you don't want to hold out for the maple neck?



+1. Wait until you can afford the one you really want.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com