| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Building amplifier http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=26752 |
Page 1 of 1 |
| Author: | Ti-Roux [ Sun Mar 28, 2010 4:58 pm ] |
| Post subject: | Building amplifier |
Hi! After I just finished my first electric bass, I'm planning to build a Tube amp. Do you guys know where I could get plans, schematics, or either kits, supplies, etc? Thanks! Francis |
|
| Author: | JohnAbercrombie [ Sun Mar 28, 2010 6:30 pm ] |
| Post subject: | Re: Building amplifier |
Ti-Roux wrote: Hi! After I just finished my first electric bass, I'm planning to build a Tube amp. Do you guys know where I could get plans, schematics, or either kits, supplies, etc? Thanks! Francis Francis- I've built a few tube amps 'from scratch' and repaired quite a few as well. I built a clone of an Ampeg B-15N, which is a tube bass amp (great for guitar as well). There is a LOT of info on the internet on building guitar tube amps- most of them could be easily adapted for bass, or you could just get a bass amp schematic and build a clone. What sort of amp are you thinking about? (power level- for playing at home, gigging, etc?) You probably know that most bass players prefer solid-state amps- it's a lot easier/cheaper to get the high-power levels needed for bass, and there's not much need for the 'tube distortion' sound for bass, usually.. I don't know of anybody producing tube bass amp kits - there are lots of Bassman kits around, but they're usually used by guitar players, I think. (Google 'Bassman amp kit'...) Lots of schematics at http://www.schematicheaven.com/ Also, it is not particularly cheap to build a tube amp if you use new, good-quality components - something to keep in mind. (The 'cheap' route is to re-use transformers from old hi-fi or PA amps) Let me know if I can help with more info. Cheers John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|