Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

different guitar idea
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=27622		 Page 1 of 1
Author:  alan stassforth [ Sat May 29, 2010 8:20 pm ]
Post subject:  different guitar idea
hey, here's my idea.
a hollow body lap steel, built like a heavy acoustic, ( thick top and back, about 5/32),
25 foot radius, about 2 inches thick, with 2 humbuckers, splitable to single coil,
acoustic type pin bridge, with a baggs pizza saddle pickup.
do ya think it might feedback too much with the humbuckers?
oh, it would have 2 output jacks, so it would be stereo.
an everything electric, and would sound a little bit acoustically as well.
i think it's a great idea, and i don't care if somebody other than i did this.
i will do it eventually, after all the other crazy ideas i come up with.
Author:  MRS [ Mon May 31, 2010 1:51 pm ]
Post subject:  Re: different guitar idea
Well hollow body lap steels are not a new idea. There are not many things that haven't been tried in the guitar building community. Don't let this idea being original hold you back from doing it...Mike.
Image
Image
Image
Author:  Ian Cunningham [ Sat Jun 05, 2010 8:07 pm ]
Post subject:  Re: different guitar idea
Sorry to see that your idea wasn't completely original, but remember you can always take it a whole new way. That sunburst lap steel down there would look awesome with violin style appointments, like the way the tops and backs overhang and whatnot, and of course get some violin varnish goin on there. Ugh my head hurts [xx(]
Author:  alan stassforth [ Sun Jun 06, 2010 7:57 pm ]
Post subject:  Re: different guitar idea
hey all.
i know there are these git-boxes around.
my idea was a square neck, with a koa top, with f-holes, a baggs saddle pup, and a couple of split-able hummers.
acoustic. mean hummers, sweet single coils
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/