| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Replacing a Floyd Rose with an American Fender trem. http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=27775 |
Page 1 of 1 |
| Author: | Ozzrael [ Thu Jun 10, 2010 6:38 pm ] |
| Post subject: | Replacing a Floyd Rose with an American Fender trem. |
I have an original Floyd Rose on one of my favorite guitars. I love the guitar but hate the Floyd and would much rather have a Fender style trem. Has anyone made that swap? To clarify, I'm talking about the 2 point Fender bridge which seems like it could hook right into the FR posts and do its thing in the cavity. I don;t have the specs on the Fender bridge or one to measure, (my strat has a vintage style). Any help would be grand. |
|
| Author: | Mustang_jt [ Mon Jun 21, 2010 6:13 pm ] |
| Post subject: | Re: Replacing a Floyd Rose with an American Fender trem. |
Best as I can tell it won't work. Your stud spacing is not the same, not to mention the Floyd Rose studs are about 1/4 inch closer to the nut than what you would need for a Fender American or Wilkinson type tremolo. Then of course there is the big rout to deal with. Hope that helps, John |
|
| Author: | Ozzrael [ Tue Jun 22, 2010 5:23 am ] |
| Post subject: | Re: Replacing a Floyd Rose with an American Fender trem. |
That is what I needed to know. I'll put up with the FLoyd then. Thank you kindly |
|
| Author: | Brett L Faust [ Sat Jun 26, 2010 3:39 am ] |
| Post subject: | Re: Replacing a Floyd Rose with an American Fender trem. |
There is hope ,Schaller makes a replacement that does not lock. Maybe Allparts carries it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|