| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Custom inaly ??? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=28167 |
Page 1 of 1 |
| Author: | Panthersn [ Sun Jul 11, 2010 3:21 pm ] |
| Post subject: | Custom inaly ??? |
Greetings all!! I'm just finishing up a custom guitar and decided to inlay the neck with someone's last name, I have the pearl cut and the inlay pockets routed. I there any special process for installing the frets that will intersect the Mother of Pearl? Any advice would be great. ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Thanks in advance |
|
| Author: | Mattia Valente [ Mon Jul 12, 2010 8:29 am ] |
| Post subject: | Re: Custom inaly ??? |
Re-cut the fret slots through the pearl and bevel the edges of the pearl itself. I always do a slight beveled egdge on fret slots (the die process rarely leaves a perfect 90% angle), but do more bevel on the pearly bits. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|