| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| What kind Of Glue for Laminating PVC Pickguard Material? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=28620 |
Page 1 of 1 |
| Author: | Ron M. [ Sun Aug 15, 2010 11:14 am ] |
| Post subject: | What kind Of Glue for Laminating PVC Pickguard Material? |
Your suggestions are appreciated, thanks Ron M. |
|
| Author: | Steve Saville [ Sun Aug 15, 2010 4:21 pm ] |
| Post subject: | Re: What kind Of Glue for Laminating PVC Pickguard Material? |
For PVC, I'd contact a Weld-On distributor. Tell them exactly what you are doing. They should have the right solvent bonding/cement for your application. |
|
| Author: | Ron M. [ Sun Aug 15, 2010 4:45 pm ] |
| Post subject: | Re: What kind Of Glue for Laminating PVC Pickguard Material? |
Steve Saville wrote: For PVC, I'd contact a Weld-On distributor. Tell them exactly what you are doing. They should have the right solvent bonding/cement for your application. Hi Steve, I just realized that I have some weld-on that I used to glue some acrylic pieces. I'll see If it works on scrap first, thanks, Ron. |
|
| Author: | Ron M. [ Sun Aug 15, 2010 8:46 pm ] |
| Post subject: | Re: What kind Of Glue for Laminating PVC Pickguard Material? |
Hi Steve, Actually, I don't have Weld-On Brand, I have Plastruct Plastic Weld. I knew the stuff I have had the word "weld" in It. It is perfect for bonding plastic to plastic. Thanks for your help and reminding me. Ron M. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|