yeah, it's been done!!
Les Paul Acoustic
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| les paul with bridge pins http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=28959 |
Page 1 of 1 |
| Author: | calgarc [ Wed Sep 08, 2010 1:18 am ] |
| Post subject: | les paul with bridge pins |
i am working on my first les paul . now the guitar is almost finished and i have glued down the ebony bridge i was thinking of adding a tailpiece when i thought how about drilling 6 holes and sticking some acoustic guitar bridge pins in there. i haven't seen any around and don't think anyone has ever done them, also would i get loads of extra tone since the strings are passing through a solid body with bridge pins then the bridge... |
|
| Author: | martinedwards [ Wed Sep 08, 2010 8:37 am ] |
| Post subject: | Re: les paul with bridge pins |
yeah, it's been done!! Les Paul Acoustic
|
|
| Author: | alan stassforth [ Wed Sep 08, 2010 9:21 am ] |
| Post subject: | Re: les paul with bridge pins |
very cool martin! did you make that? what's up with it? pickups etc. |
|
| Author: | martinedwards [ Wed Sep 08, 2010 10:14 am ] |
| Post subject: | Re: les paul with bridge pins |
did I make. it? I wish!! Nah Gibson did a short run about 10 years or so ago. hollow (chambered?) with a piezo pup under the saddle. I DID make an acoustic les PaulISH guitar right at the start of my building career but I used a trapeeze tailpiece rather than pins. |
|
| Author: | calgarc [ Wed Sep 08, 2010 10:54 pm ] |
| Post subject: | Re: les paul with bridge pins |
martinedwards wrote: yeah, it's been done!! Les Paul Acoustic awesome... searched on google for one  anway i have 2 buckers in my lp still waxing the finish
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|