| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Where can I find a Strat neck plan? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=29019 |
Page 1 of 1 |
| Author: | Dave Olds [ Sat Sep 11, 2010 7:46 pm ] |
| Post subject: | Where can I find a Strat neck plan? |
Hi there, I normally build acoustics, but due to high humidity here at the moment, I thought I would have a crack at building an electric ( I'm going stir crazy not being able to build ) I have found a good plan for the body of a 60s Strat, and have been making good progress on the body - but I am having difficulty finding a plan that I can use to make the neck/headstock template. Does anyone know where I can get hold of a neck plan - preferably in .pdf format. Either something I can print off at 100% to use to make the template, or something with all the dimensions that I can draw a full size plan from. Thanks Dave. |
|
| Author: | superfly [ Sun Sep 12, 2010 2:41 am ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
In this file there's a complete strat plan, maybe its helpful. http://www.4shared.com/document/kmCPllUX/Guitar_Building_Plans.html |
|
| Author: | Ian Cunningham [ Sun Sep 12, 2010 5:07 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
How does one get these on paper? |
|
| Author: | theguitarwhisperer [ Mon Sep 13, 2010 9:04 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
www.guitarbuildingtemplates.com All kinds of templates. |
|
| Author: | Dave Olds [ Mon Sep 13, 2010 11:23 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
Thanks very much to those that have replied. Wim - I will try printing a copy of the plan from the file that you sent. Unfortunately as there are very few measurements on the plan, I do not know if this is the correct scale or not. I will give it a shot and see how it measures out. If there are any other plans out there I would sure appreciate it. Thanks Dave |
|
| Author: | Mustang_jt [ Tue Sep 14, 2010 5:26 am ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
I have some plans but it won't let me up load them (too big) shoot me a PM and I can email them to you John |
|
| Author: | turmite [ Tue Sep 14, 2010 1:28 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
I have a 3d model that was posted on cnc zone. I don't know if that will help you or not, but you are welcome to it. Mike |
|
| Author: | Dave Olds [ Tue Sep 14, 2010 2:46 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
Thanks John - I have pm'd you my eMail address. Thanks for the offer Mike - but the 3d model will probably not be much help to me. Cheers Dave |
|
| Author: | Mustang_jt [ Tue Sep 14, 2010 2:55 pm ] |
| Post subject: | Re: Where can I find a Strat neck plan? |
Its on its way to your inbox, I hope it helps, the dimensions are on there at least. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|