| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Neck Through Blank http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=29230 |
Page 1 of 1 |
| Author: | Ian Cunningham [ Sat Sep 25, 2010 10:36 pm ] |
| Post subject: | Neck Through Blank |
I'm looking for a neck blank that would be suitable for a neck through body short scale bass. 40"x2.5"x3" I think would be suitable. If I have to use several pieces to get the desired width that is absolutely fine. I'd prefer Spanish Cedar or any Mahogany variant. Good Sapele would do nicely I think. Please PM me if you are a wood dealer and have something on hand that would be suitable. I am aware that Stewmac sells neck through blanks. Just wanted to get that out of the way. I am only interested in raw wood, milled or otherwise, and the grain should, of course be right for a neck. |
|
| Author: | theguitarwhisperer [ Sun Sep 26, 2010 10:00 am ] |
| Post subject: | Re: Neck Through Blank |
Go to Weiss Hardwoods in Clearwater. They have exotics, and stuff. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|