Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

How do you ground an archtop?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=29456
Page 1 of 1

Author:  Ricardo [ Tue Oct 12, 2010 2:50 pm ]
Post subject:  How do you ground an archtop?

All the diagrams I've seen show grounding to the bridge. What do you do in the case of an archtop with floating bridge? I have 2 humbuckers, 2 vol, 2 tone and a 3-way switch.

Author:  Darrel Friesen [ Tue Oct 12, 2010 6:33 pm ]
Post subject:  Re: How do you ground an archtop?

Most people, if inclined to ground the strings, ground the tailpiece if metal, or add a strip of brass to the underside of a wooden tailpiece and ground to that.

Author:  peters instruments [ Tue Oct 12, 2010 6:34 pm ]
Post subject:  Re: How do you ground an archtop?

you should still be able to ground to the bridge, just run a wire from your electronics to one of the bridge posts, should be the same as any other tune-o-matic.

Author:  Ricardo [ Tue Oct 12, 2010 7:15 pm ]
Post subject:  Re: How do you ground an archtop?

There has to be a more elegant solution. I have a wood base to the bridge and a Benedetto type tailpiece. Can't imagine a wire running to either one.

Author:  alan stassforth [ Tue Oct 12, 2010 8:05 pm ]
Post subject:  Re: How do you ground an archtop?

If it makes noise, and it bothers you, you could try a wrist ground.
A bracelet that ties into the ground somewhere.
My advise to somebody that doesn't like a noisy guitar or amp is,
play it, then you won't hear the noise.

Author:  Brett L Faust [ Fri Oct 15, 2010 8:55 pm ]
Post subject:  Re: How do you ground an archtop?

See a Norlin era Les Paul wiring harness. Notice no ground connection to strings but very thorough shielding even a jack "can".

Author:  Ricardo [ Sat Oct 16, 2010 11:12 am ]
Post subject:  Re: How do you ground an archtop?

I ended up attaching a wire to the low E string ball end and running it to the output jack. The bridge is a tune-o-matic so should ground the other strings.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/