Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Different screw lengths for bolt on neck
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=29919		 Page 1 of 1
Author:  aznricey [ Sun Nov 14, 2010 10:57 pm ]
Post subject:  Different screw lengths for bolt on neck
This actually goes to a project RG i'm working on and a BC Rich Iron Bird of a friend.

I ordered a set of genuine RG neck screws/bolts and noticed there are 2 lengths to it (2 short 2 long see picture) but i have no idea where i'm supposed to place the screws.

As for my friend's Ironbird he had a stripped neck screw holes so it's apart already. Same deal.

Here are my RG screws

2 Screws 1-3/8" Long
2 Screws 1-9/16" Long
Image
Author:  alan stassforth [ Mon Nov 15, 2010 9:35 am ]
Post subject:  Re: Different screw lengths for bolt on neck
Stick a toothpick in the neck holes to see which ones are deeper.
If they're the same depth,
I'd put the long ones on the end of the neck.
More up-lift there.
Author:  alan stassforth [ Mon Nov 15, 2010 9:50 am ]
Post subject:  Re: Different screw lengths for bolt on neck
Oops, brain fart here dis morning.
Long screws at the end of the body,
I would say.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/