| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 6-String Bass Nut File http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=29956 |
Page 1 of 1 |
| Author: | Zach Ehley [ Wed Nov 17, 2010 5:09 pm ] |
| Post subject: | 6-String Bass Nut File |
I've done a little looking and am having a hard time finding a nut file for a low B string on a 6-string bass (or 5-string). 0.135 For those of you who have built a 5-6 stringer, what have you used? |
|
| Author: | Ti-Roux [ Wed Nov 17, 2010 5:44 pm ] |
| Post subject: | Re: 6-String Bass Nut File |
One thing you can do for bass nuts, because strings are quite large... You can begin the slot with some file (I like triangle one, it's precise). File till maybe a 64th before you desired depth. Then, take 1'' or 2 from a string of the desired gauge, then glue it (CA) on a wood stick. You have a cheap file, exactly the size you need. It don't cut that much, but it's perfect to do the final slot shaping. Francis |
|
| Author: | theguitarwhisperer [ Wed Nov 17, 2010 9:33 pm ] |
| Post subject: | Re: 6-String Bass Nut File |
I use a .120 and roll it in the slot. |
|
| Author: | alan stassforth [ Wed Nov 17, 2010 10:58 pm ] |
| Post subject: | Re: 6-String Bass Nut File |
Or, use a round tapered jewelers file, and stop when it's the same as the string gauge. I like the other ideas too! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|