| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Routing bit sizes for neck pocket http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=30378 |
Page 1 of 1 |
| Author: | Juss [ Sat Dec 18, 2010 5:25 pm ] |
| Post subject: | Routing bit sizes for neck pocket |
Hi What size of routing bits you guys using for neck pocket routing? I made a routing jig similar to Filippos and Mykas and I cant rout the depth I want with my 1/2" bit witch cuts 1"deep. I want the pocket to be 2 degrees and 34 mm deep in point where T'the neck joins the body. Any suggestions ? Thanks Juss |
|
| Author: | Juss [ Sun Dec 19, 2010 3:10 pm ] |
| Post subject: | Re: Routing bit sizes for neck pocket |
Thanks Filippo |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|