Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Madrone Burl Carve Top Hollowbody
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=30397		 Page 1 of 1
Author:  Nicholas Paul Wilson [ Mon Dec 20, 2010 12:31 am ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
That is some sick burl! :o
Author:  alan stassforth [ Mon Dec 20, 2010 8:40 pm ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
Aren't you glad you carved that one right handed! bliss
Nice looking, Filippo!
You going to keep this build?
I know you have a nice amp you built.
Author:  Jojobilou [ Tue Dec 21, 2010 7:00 am ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
You're going to blow out ours brains with these top Filippo !!! :shock: [clap] [:Y:]

I love ibex top carving, isn't that great ??? :)
Author:  Peter J [ Tue Dec 21, 2010 5:21 pm ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
Quote:
In the Vac, we don't get real good moisture evaporation, so now I've put a breather cloth on top and covered with heavy rocks to keep the plate flat while it dries out.


Phillipo, I have little experience using vacuum for glue-ups (have all the equip. - just haven't put it together yet) but I'm puzzled by your statement. Shouldn't a lower gas pressure also lower the vaporization point of the water and liquids in the glue? I understand the use of the breather cloth to allow gas-off in all areas.

Wouldn't an extended time under vacuum allow a complete drying of the glue?
Author:  Darrin D Oilar [ Thu Dec 23, 2010 11:35 am ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
That figure right at the bookmatch looks like a Killer Alien Stingray. Beautiful piece of wood. Under finish it's going to look like in Star Wars when they'd make the jump to light speed (with a killer alien stingray) :).

Awesome.

Darrin
Author:  Gabby Losch [ Thu Dec 23, 2010 5:58 pm ]
Post subject:  Re: Madrone Burl Carve Top Hollowbody
Filippo Morelli wrote:
Don't know where this guitar is headed, yet.

I thought I had already sent you my home address. Hmm....I'll send it again. ;)
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/