Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Centerline slightly off
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=30660
Page 1 of 1

Author:  jimmysux [ Mon Jan 10, 2011 2:28 pm ]
Post subject:  Centerline slightly off

My centerline is off on this latest project, not by much at all, but it is still off, and I have set the neck. I haven't drilled for the bridge yet though, can I just compensate by offsetting the bridge slightly? Or will it not be that big of a deal and just construct as usual. It is probably off by less than 1 degree.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/