| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Grain filling the base coat http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=30893 |
Page 1 of 1 |
| Author: | Decker [ Fri Jan 28, 2011 6:58 pm ] |
| Post subject: | Grain filling the base coat |
Hi, I have an unfinished solid ash bass body that I have grain filled with an oil based grain filler. I have then coated the body with sanding sealer, sanding in between coats as I go along. When this was all prepared the body looked good and felt smooth. I then sprayed on the white base coat when this dried there were a few bits of unfilled grain showing through.What is the best thing to use to fill this grain with,I have tried the oil base grain filler that I initially use but this dosen't seem to fill the grain. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|