| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Semi Hollow/Solid Body Ukulele http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=30951 |
Page 1 of 1 |
| Author: | Britt [ Tue Feb 01, 2011 6:00 pm ] |
| Post subject: | Semi Hollow/Solid Body Ukulele |
I recently started looking into Ukuleles and how they are built, and starting making some drawings in my notebook for a Semi Hollowed Ukulele. The design I drew up specifically, is a Telecaster type body based off the semi hollow thinline series. I'm still a beginner to building instruments, but I'm very excited in getting my chance to build this seeing as its something rarely done. How well do you guys think something likes this would work? I was wondering how I would go about doing the neck joint, seeing as I wouldn't have as wide a body to work with. I already have a pickup in mind to use, but cannot find a micro sized 4 string bridge. ~Britt |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|