| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Faux binding PRS style http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=31030 |
Page 1 of 1 |
| Author: | Danny R. Little [ Mon Feb 07, 2011 2:04 pm ] |
| Post subject: | Faux binding PRS style |
Any tips on getting a good binding look, like PRS, on a great maple top? I understand the finish is scraped to look like binding, but curious on how to prevent chipping, etc. If there has been a toot, please send me in the right direction. My searches resulting in leveling binding. Thanks Danny R. Little |
|
| Author: | Darrel Friesen [ Mon Feb 07, 2011 8:19 pm ] |
| Post subject: | Re: Faux binding PRS style |
Stew Mac's has a tutorial that may help. http://www.stewmac.com/freeinfo/Finishi ... uitar.html |
|
| Author: | Mustang_jt [ Tue Feb 08, 2011 9:38 am ] |
| Post subject: | Re: Faux binding PRS style |
I do it basically like the stew mac tutorial. The best advice I can give on it is to use automotive pin striping tape. Regular masking tape won't cut it, especially if you are staining the wood itself, and then you can just scrape to clean it up. |
|
| Author: | Danny R. Little [ Tue Feb 08, 2011 10:16 am ] |
| Post subject: | Re: Faux binding PRS style |
Thanks! I reviewed the Stew-Mac tutorial and it was just what I needed to know. Danny R. Little |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|