Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

AANJ neck joint on single cutaway
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=32292
Page 1 of 1

Author:  calgarc [ Mon May 23, 2011 1:40 pm ]
Post subject:  AANJ neck joint on single cutaway

i am thinking of doing an aanj neck pocket for a bolt on les paul/tele style shaped guitar.

Image

the guitar i am doing it to is an old electric i am picking up used. the guitar itself sounds pretty good providing i replace the stock pickups but the metal mounting plate on the back just doesn't feel right...

Image

since garage sale season started, i have been picking up old guitars and repairing/modding them then trading them for other guitars :D I recently downsized my collection and need a decent electric to take with me when i move next year. haha its just my classical and my 6 string uke right now...

Author:  JimO [ Mon May 23, 2011 4:14 pm ]
Post subject:  Re: AANJ neck joint on single cutaway

StewMac has neck mounting ferrules. Use a forstner bit to drill flat bottom holes. You can smooth out the edges as well. Drop in the ferrels and put your screw thru it and you're good to go.

http://www.stewmac.com/shop/Hardware,_p ... rules.html

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/