| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pre-CBS Stratocaster templates http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=33092 |
Page 1 of 1 |
| Author: | Laurent Brondel [ Thu Aug 04, 2011 12:53 pm ] |
| Post subject: | Pre-CBS Stratocaster templates |
I am looking for accurate templates or plans for a pre-CBS strat, any idea? |
|
| Author: | Chris Pile [ Thu Aug 04, 2011 1:12 pm ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
Gee, other than a few pickguard hole locations I don't think Freddy Tavares and Leo's design has changed all that much. |
|
| Author: | Laurent Brondel [ Thu Aug 04, 2011 2:45 pm ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
Wonderful, I still need an accurate blueprint, or templates or plan. BTW the peghead, bevels, roundover, truss rod access, fretboard thickness, dots and side dots and I forget a few things probably, all have changed and evolved through the years. |
|
| Author: | Jeff Highland [ Thu Aug 04, 2011 5:13 pm ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
This is supposed to be a 1962 body plan based on Fender info but corrected for errors https://skydrive.live.com/?cid=8443307c ... F0FC%21208 I have a 50's neck pdf if you want it (maple) |
|
| Author: | Jeff Highland [ Thu Aug 04, 2011 5:51 pm ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
Also check out this build thread on the tdpri http://www.tdpri.com/forum/tele-home-de ... build.html |
|
| Author: | Laurent Brondel [ Fri Aug 05, 2011 5:59 am ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
Thanks much Jeff, exactly what I'm looking for. If you want to email me the '50s neck pdf that would be great! laurent at laurentbrondel dot com |
|
| Author: | oval soundhole [ Thu Aug 11, 2011 9:43 pm ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
Laurent, your going electric now? |
|
| Author: | Laurent Brondel [ Tue Aug 23, 2011 10:11 am ] |
| Post subject: | Re: Pre-CBS Stratocaster templates |
It's the crossroads. Another bad contract for the Devil… |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|