| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Wiring StewMac's 6 position 4 pole switch??? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=33286 |
Page 1 of 1 |
| Author: | Danny R. Little [ Mon Aug 22, 2011 12:45 pm ] |
| Post subject: | Wiring StewMac's 6 position 4 pole switch??? |
I'm building my 5th electric guitar and the client wants to use 2 Seymour Duncan humbuckers (4 conducter wiring + bare grd) separated by a Texas single coil (2 conducter) wired through a 6 position, 4 pole switch from StewMac to a single volume, single tone, and mono jack. The desired swithing would be each pup separately, all pups in phase, all pups w/single coil out of phase, and bridge w/single coil out of phase. I've wired it up but only the all pups in phase selection works (and sounds fabulous BTW). I've checked on the internet with little luck. I've also done a search on this forum. Can anyone help me out? Thanks Danny R. Little |
|
| Author: | Sandywood [ Mon Aug 22, 2011 4:13 pm ] |
| Post subject: | Re: Wiring StewMac's 6 position 4 pole switch??? |
Maybe this will help Danny. http://alexplorer.net/guitar/mods/rotary.html |
|
| Author: | Mad Raxz [ Mon Aug 22, 2011 10:49 pm ] |
| Post subject: | Re: Wiring StewMac's 6 position 4 pole switch??? |
I have seen great help on diagrams on SD´s forum http://www.seymourduncan.com/forum/ and here too http://www.mylespaul.com/forums/tonefre ... brary.html Good luck! |
|
| Author: | Danny R. Little [ Tue Aug 23, 2011 8:38 am ] |
| Post subject: | Re: Wiring StewMac's 6 position 4 pole switch??? |
Thanks! I have already tried the SD website. The videos of SD replacing Strat, Tele, and Les Paul pickups are very good. I'll try the other sites today. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|