Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Strat Clone Build
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=33825		 Page 1 of 1
Author:  Pineapple [ Sun Oct 09, 2011 10:49 pm ]
Post subject:  Strat Clone Build
This Is My Strat Clone Build In Progress. ( This Is My 2nd Build and A Little More Difficult Than The Previous Seeing That The Body Didnt Have The Proper Routings Or Any Of The Inner Cavity Holes Drilled , Neck Mounting Holes , Bridge Holes Ect....( Which Now Are Currently Finished)
Plan On Doing The Routing For Double Coil And Paint 2Maro. [:Y:]
( I Chose A Dupli-Color MS 100 Burnt Copper Metallic Paint ( Its Has A Orange Color To It)
I Sure Hope It Looks Well With The PickGuard :)
Im A Player And Not A Season Builder Like You Guys...But im Learning Along The Way... (2nd Build) But Pretty Proud This One. [:Y:]
Author:  Ti-Roux [ Mon Oct 10, 2011 11:54 am ]
Post subject:  Re: Strat Clone Build
Capital letters go at the beginning of each sentence, not every word. :geek:
Author:  BRC [ Mon Oct 10, 2011 11:57 am ]
Post subject:  Re: Strat Clone Build
Cool build! That thing is going to growl with the Duncans in it, especially the HB in the bridge position. Sweet. Keep us updated as you move forward.

About the Krylon, you might want to do some grain fill with clear lacquer or at least look at where you are with the smoothness before you blast it with a coat of enamel? (maybe you already did this? I can't tell) It's just a heck of a lot harder to go back later if it doesn't suit you...
Author:  Pineapple [ Tue Oct 11, 2011 4:53 pm ]
Post subject:  Re: Strat Clone Build
Thanx BRC [:Y:]
Author:  Pineapple [ Tue Oct 11, 2011 5:07 pm ]
Post subject:  Re: Strat Clone Build
Decided to change the color and go with this transparent yellow
( The poor lighting here dosent really show the true color)

Heres Where Im At With It :
Author:  alan stassforth [ Tue Oct 11, 2011 7:18 pm ]
Post subject:  Re: Strat Clone Build
I like that wood.
I'm glad you went with that transparent color.
Author:  Pineapple [ Tue Oct 11, 2011 7:51 pm ]
Post subject:  Re: Strat Clone Build
Thanx Alan. I Agree [:Y:]
Author:  Pineapple [ Tue Oct 11, 2011 11:17 pm ]
Post subject:  Re: Strat Clone Build
Thanx For The Grammer Lesson Ti - laughing6-hehe
Author:  BRC [ Tue Oct 11, 2011 11:29 pm ]
Post subject:  Re: Strat Clone Build
Love the look with the tinted clear. Looks very rich!
Author:  Pineapple [ Wed Oct 12, 2011 10:40 am ]
Post subject:  Re: Strat Clone Build
Thanx BRC... I Used A PPG Clear That Worked Quite Well ( Over A Single Light Coat Of Yellow). I Wish The Lighting Was Better Here To Really Show The Color..( If The Weather Clears Up Here Today... Ill Take It Outside And Get Some Better Pics.)
Was Also Thinkin About Installing A Simple Silicon Fuzz Circut Under The Pickguard On A Push Pull Volume Pot. But Not Sure About That Yet... idunno
Author:  alan stassforth [ Wed Oct 12, 2011 7:33 pm ]
Post subject:  Re: Strat Clone Build
I wouldn't put the fuzz circuit in.
It will probably sound artificial.
I'm just thinking out loud though.
Author:  Pineapple [ Thu Oct 13, 2011 7:38 pm ]
Post subject:  Re: Strat Clone Build
Im Startin To Think The Same Alan.. Thanx [:Y:]
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/