I'm just starting to get the materials together for an ES335 clone,and I have an admittedly dumb question...
Could someone recommend a good supplier of 5/8" maple boards for the top and back of the guitar?
Thanks for your patience,
Robb
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Wood sourcing http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=34210 |
Page 1 of 1 |
| Author: | Robb Hindle [ Sat Nov 12, 2011 9:22 am ] |
| Post subject: | Wood sourcing |
I'm just starting to get the materials together for an ES335 clone,and I have an admittedly dumb question... Could someone recommend a good supplier of 5/8" maple boards for the top and back of the guitar? Thanks for your patience, Robb |
|
| Author: | alan stassforth [ Sat Nov 12, 2011 11:59 am ] |
| Post subject: | Re: Wood sourcing |
http://www.stewmac.com/shop/Bodies,_nec ... e_Set.html |
|
| Author: | Robb Hindle [ Sat Nov 12, 2011 3:49 pm ] |
| Post subject: | Re: Wood sourcing |
Thanks for that link! |
|
| Author: | muskr@ [ Sat Nov 12, 2011 5:36 pm ] |
| Post subject: | Re: Wood sourcing |
I try to avoid buying from places like stewmac because you can buy the same wood at a much lower price if you don't buy it in the form of blanks. If you can't find a local source, or have no way to mill the wood to the right size, I've heard good things about http://oregonwildwood.com/. Not as cheap as a lumber store, but still cheaper than stewmac. |
|
| Author: | Bob Shanklin [ Sat Nov 12, 2011 9:27 pm ] |
| Post subject: | Re: Wood sourcing |
http://www.curlymaple.com/ They are located in PA |
|
| Author: | Robb Hindle [ Wed Nov 16, 2011 9:49 am ] |
| Post subject: | Re: Wood sourcing |
Thanks! But what I'm looking for is something without figuring. The ES335 I'm working on will be alpine white, and it would be a waste to cover great figuring with paint. |
|
| Author: | BRC [ Wed Nov 16, 2011 1:38 pm ] |
| Post subject: | Re: Wood sourcing |
If you are just looking for straight grain maple you should be able to buy that at any local hardwoods store. Cabinet makers in your area should know who to go to or just look in your local phone book. In my area the hardwood supplier also has rough milling capabilities so if they only have say, 3/4 then they might be able to plane it to what you need. Otherwise any cabinet shop can do that one for you. |
|
| Author: | jimmysux [ Thu Nov 17, 2011 8:12 pm ] |
| Post subject: | Re: Wood sourcing |
This is why I love having a big bandsaw and a helical head planer and jointer, being able to mill my own wood saves me a ton of $$$. |
|
| Author: | Robb Hindle [ Sun Nov 20, 2011 10:26 am ] |
| Post subject: | Re: Wood sourcing |
Yeah. that would be cool. gotta see about getting one. |
|
| Author: | HaMMerHeD [ Sun Nov 20, 2011 10:35 am ] |
| Post subject: | Re: Wood sourcing |
jimmysux wrote: This is why I love having a big bandsaw and a helical head planer and jointer, being able to mill my own wood saves me a ton of $$$. Yeah. Those are nice tools to have. But for a hobbyist builder (like me), it would take a very long time for that equipment to pay for itself in terms of saving on lumber costs. |
|
| Author: | jimmysux [ Mon Nov 21, 2011 6:50 pm ] |
| Post subject: | Re: Wood sourcing |
I am a hobbyist builder myself. I got the bandsaw for 350$ and the helical jointer and planer for 900$ on ebay. I use steel city 13" helical head planer and their 6" table top helical head jointer. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|