| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pickup ring http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=34339 |
Page 1 of 1 |
| Author: | PT66 [ Wed Nov 23, 2011 11:58 am ] |
| Post subject: | Pickup ring |
Does anyone know if the Stewmac Strat pickup ring for single coil will work for an EMG Select model SES pickup? |
|
| Author: | theguitarwhisperer [ Wed Nov 23, 2011 6:29 pm ] |
| Post subject: | Re: Pickup ring |
It should but the EMG pickups usually have square bottoms below the mounting ring. The mounting ring will work for the pickup definitely, but you will have to check the guitar cavity to make sure the pickup fits the body cavity when the ring is installed, and you may need to excavate wood for that. |
|
| Author: | peters instruments [ Wed Nov 23, 2011 8:28 pm ] |
| Post subject: | Re: Pickup ring |
verhoevenc wrote: I wouldn't imagine why not? Strat-style single coils usually follow the same size specs. It wouldn't make much sense to build after market pickups that aren't direct replacements. Chris Its a legitmate question (one that I dont know the answer to) I have had emg humbuckers that would not fit standard pickup rings without filing them down. for some reason the covers are just larger on emg pickups. |
|
| Author: | PT66 [ Thu Nov 24, 2011 5:59 am ] |
| Post subject: | Re: Pickup ring |
Is there a standard dimension for screw spacing and length and width of the pickup? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|