Official Luthiers Forum!

Anyone got a Factory wiring diagram for a Fender HM Strat?

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

If you go to Fender's site, you can download a wiring diagram for any instrument they make from their support section.
Sorry. They have diagrams for almost every one. Can't find the HM.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.

Yeah, Looked there first. Found one on another forum, but it is hand drawn, does not look like an official schematic.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

I found this.
Hope it helps.
http://www.google.com/search?client=saf ... 8&oe=UTF-8

Yes, The hand drawn one that says courtesy of fender is the one I've seen. What I do not get is how a coil tap switch works if the coils are connected at the pick-up. Don't I need at least 3 wires coming from the pick-up to tap a coil with a switch?

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

I see what you mean.
http://www.seymourduncan.com/support/wi ... tone_split
In my previous reply, a diagram shows not enough wires for a coil tap from the hummer.
Wierd.
Anyway, you can see in the SD diagram how it goes.
Good luck!