Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Crotch Figure Mahogany Singlecut
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=34878		 Page 1 of 1
Author:  Ziegenfuss [ Sat Jan 07, 2012 9:24 pm ]
Post subject:  Crotch Figure Mahogany Singlecut
Hey,

I have been out of the loop for a little while, wanted to show a recently finished piece.

This is a crotch mahogany topped singlecut, set over an aspen core. I used a matching set of wood for the back plate. It is set up with two singlecoils, volume, blend, treble, bass, mid EQ, with a variable mid frequency boost selector circuit. It plays well, if not a little punchy for those who are passive to the core, but overall, I think it is a really nice bass - but hey, I built it :).

Thanks!
Stephen
Author:  Lincoln Goertzen [ Sun Jan 08, 2012 2:51 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Very nice work!
Author:  Jim_H [ Sun Jan 08, 2012 4:50 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Really incredible Stephen.

What finish did you use ?
Author:  Bobc [ Sun Jan 08, 2012 4:57 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Beautiful. [:Y:]
Author:  P Bill [ Sun Jan 08, 2012 5:05 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Lovely bass, very understated.
Author:  Tony_in_NYC [ Sun Jan 08, 2012 7:58 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Gorgeous!
Author:  cphanna [ Sun Jan 08, 2012 10:39 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Wicked cool!
Author:  Mike Baker [ Tue Jan 10, 2012 7:30 pm ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Nice to see you post here again, Z! I've missed your presence on this board, as well as your beautiful work.
The instrument above is another fine example.
Author:  VirgilGuitar [ Fri Jan 13, 2012 12:59 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
simply stunning [:Y:]
Author:  alan stassforth [ Sat Jan 14, 2012 9:22 pm ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Wow!
When I first saw this I thought the upper upper bout looked weird,
but I like it, a lot!
Different is good.
Only thing I don't like about it is,
and this is my own thing as a player is,
too many knobs!
Author:  Ziegenfuss [ Sun Jan 15, 2012 9:51 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Yeah...the knobs...
I originally installed a pixel transfer in the aspen core laminate, so that had its own treble roll off and volume. Then after i went through work to design and print a custom dreams, and spent forever tuning the gain and the corners, i decided i did not like it and installed the 3 band eq. Alas....
Author:  Parser [ Wed Jan 18, 2012 11:59 am ]
Post subject:  Re: Crotch Figure Mahogany Singlecut
Awesome work, as usual...!

Trev
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/