Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 5:50 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Fri Jan 27, 2012 4:18 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 15, 2010 4:49 pm
Posts: 365
Focus: Build
Status: Amateur
Does anyone know where I can get a spiral cut flush trim but with the bearing on the bottom instead of the top? I would prefer a 1/4" shank but can do 1/2". I've been looking a lot an cant seem to find one. Any help would be appreciated.


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 5:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
http://www.google.com/products/catalog? ... CHoQ8wIwAg

Here's one. Don't know if it's the BEST place to get one, but they're available.

_________________
Old growth, shmold growth!


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 5:40 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 15, 2010 4:49 pm
Posts: 365
Focus: Build
Status: Amateur
Thanks but that has the bearing on top, I'm looking for one on the bottom. Incidentally I have that exact bit already. It's a good bit!


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 5:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
is it necessary for it to be spiral cut? what are you trying to do?


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 6:42 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 15, 2010 4:49 pm
Posts: 365
Focus: Build
Status: Amateur
No special reason, I just like the cleaner cuts they produce


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 7:24 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Sep 12, 2010 11:44 am
Posts: 576
First name: Mark
City: Concord
State: NC
Country: USA
Focus: Build
Status: Amateur
Image
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_solid.html#spiral_flushtrim_anchor

No experience with this bit but it has what you want.

Here's a different spin:
Image
http://www.amanatool.com/bits-fv/46192.html

and another:
Image
http://www.amanatool.com/bits-fv/46300.html

and another:
Image
http://www.amazon.com/RFT5200-CARBIDE-UP-CUT-SPIRAL-ROUTER/dp/B0012JI870


Last edited by Mark Fogleman on Fri Jan 27, 2012 7:50 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 7:38 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 15, 2010 4:49 pm
Posts: 365
Focus: Build
Status: Amateur
I'm looking for one with a top guide bearing, like you use on a plunge bit


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 7:47 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 13, 2011 9:33 pm
Posts: 42
First name: Everett
Last Name: Caudle
City: Alachua
State: FL
Zip/Postal Code: 32615
Country: USA
Focus: Build
Status: Amateur
Post 1:
jimmysux wrote:
Does anyone know where I can get a spiral cut flush trim but with the bearing on the bottom instead of the top?


Post 7:
jimmysux wrote:
I'm looking for one with a top guide bearing, like you use on a plunge bit


OK, Jimmy. You gotta make up your mind if we’re gonna help you.
idunno


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 7:54 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 15, 2010 4:49 pm
Posts: 365
Focus: Build
Status: Amateur
Yeah I got mixed up sorry, top guide bearing


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 8:10 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Sep 12, 2010 11:44 am
Posts: 576
First name: Mark
City: Concord
State: NC
Country: USA
Focus: Build
Status: Amateur
You could always turn your router upside down. laughing6-hehe


Top
 Profile  
 
PostPosted: Fri Jan 27, 2012 11:26 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 13, 2011 9:21 am
Posts: 783
First name: Virgil
Last Name: Mandanici
State: FL
Focus: Build
Actually everyone, Jimmy is PROBABLY looking for a SIDE-Bearing...

laughing6-hehe [uncle] laughing6-hehe [uncle]

_________________
"Talking about music is like dancing over architecture".
See the most insane first guitar build: http://www.virgilguitar.com
http://www.youtube.com/VirgilGuitar


Top
 Profile  
 
PostPosted: Sat Jan 28, 2012 8:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Spiral bits are mainly designed for CNC use and plunge cutting. Never seen one with the bearing between the shank and flutes. You could use this bit with a 1/2" shank and a 3/4" cut
http://routerbitworld.com/Amana-46109-S ... 046109.htm
Use it with a guide collar and you will get the same effect, just more trouble to set up and not as smooth, that is of course if you don't have coronary when you see the price on the bit.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com