| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Carve top thickness? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=35563 |
Page 1 of 1 |
| Author: | James Ringelspaugh [ Tue Feb 28, 2012 3:55 pm ] |
| Post subject: | Carve top thickness? |
I have some pretty wood that I think would make a great Les Paul-style top, but it's not 5/8" thick. What's the minimum thickness for a carved top? 1/2"? |
|
| Author: | Mike Baker [ Tue Feb 28, 2012 5:10 pm ] |
| Post subject: | Re: Carve top thickness? |
Depends on how deep your top carve is. I've toyed with the idea of doing a 3/16" deep top carve on a 1/4" piece of wood. Haven't done it yet. I think it might be pushing my luck, but I bet it would work if I was careful. However, for a Les Paul, I think 1/2" would work just fine. |
|
| Author: | theguitarwhisperer [ Tue Feb 28, 2012 5:31 pm ] |
| Post subject: | Re: Carve top thickness? |
Are they 5/8th's thick? Doesn't matter. It can be as thin as 1/4th inch (or thinner depending on your carve profile), make up the extra thickness with the body. Carve the top down to 1/32 at the edges and bind it. No one will ever know or care. I usually do mine 1/2 inch thick. |
|
| Author: | peters instruments [ Thu Mar 01, 2012 10:31 pm ] |
| Post subject: | Re: Carve top thickness? |
The first time I ever tried carving a top I tried to do it with a 1/4" thick piece of figured cherry. My advice: dont do that. Pretty much ruined a nice piece of cherry, if you are starting with anything much less than a 1/2 I wouldnt carve it, to me it just kinda looks odd. also the thinner your carve is the harder it will be to get it nice and even, a thicker carve is just a little bit more forgiving. If it is thinner than 3/8 i say you are better off making a flat top. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|